05
THANK YOU
for choosing this DÖRR quality product.
Please read the instruction manual and safety hints carefully before fi rst use.
Keep this instruction manual together with the device for future use. If other people use this device, make
this instruction manual available. This instruction manual is part of the device and must be supplied with the
device in case of sale.
DÖRR is not liable for damages caused by improper use or the failure to observe the instruction manual and
safety hints.
GB
SAFETY HINTS
•
Make sure that there is enough ventilation during operation of the photo box. After use, disconnect the photo
box from the power.
•
Do not touch the electronic parts with wet hands.
•
Protect the photo box from rain, humidity and extreme temperatures.
•
Make sure to use the supplied AC adapter only for operation of the photo box.
•
Do not attempt to repair the device by yourself. Risk of electric shock! When service or repair is required,
contact qualified service personnel.
•
People with physical or cognitive disabilities should use the device with supervision.
•
People with cardiac pacemakers, defibrillators or any other electrical implants should maintain a minimum
distance of 30 cm, as the device generates magnetic fields.
•
Do not use the device nearby mobile phones and devices that generate strong electromagnetic fields.
•
This device is not a toy. To prevent accidents and suffocation keep the device, the accessories and the
packing materials away from children and pets.
•
Do not use benzene or abrasive cleansers to clean the photo box. We recommend using a lint-free slightly
damp micro fibre tissue to clean the fabric tent. Wipe the LED surfaces occasionally with a soft and dry tissue.
Disconnect the photo box from power for this purpose.
•
Store the photo box at a dust free, dry and cool space.
•
If the device is defective or without any further use, dispose of the device according to the Waste Electrical
and Electronic Equipment Directive WEEE. For further information, please contact your local authorities.
PRODUCT DESCRIPTION
The LB-6575 LED photo box with dimmer grants an optimum, diff use and complete illumination for pro-
duct photography, e.g. for jewellery, glasses and more without any disturbing shadows and refl ections.
CHARACTERISTICS
•
Pop-up function for fast and simple set-up
•
Constant colour temperature of 5600 K
•
High colour rendering
•
High quality and long-lasting LEDs avoid the generation of extreme heat and ensure soundless work
•
Brightness can be dimmed using the control unit
•
Supplied with two synthetic backgrounds of black and white colour
NOMENCLATURE
01
Fabric tent with Velcro cover
02
Diff usor
03
Velcro fi xture for diff usor
04
2 LED rails with cable
05
Rubber loops for LED rails
06
Control unit (dimmer) with socket and 2 connector plugs
07
AC Adapter with 2 connector plugs
08
Opening for cable connection
09
Opening for shootings from the top
10
4 clips to fi x the background
11
Loops for clips (front below, above behind)
12
Synthetic backgrounds (black and white)
INSTRUCTIONS FOR SET-UP
Before set-up, make sure that you have enough space around you.
WARNING
The tent comes with a pop-up function, i.e. it will unfold automatically when you let it go.
In order to avoid injuries, remove the fabric tent carefully out of the transportation cover
and hold it firmly. Now hold it away from your body and let it go. It now pops up!
MOUNTING THE SYNTHETIC BACKGROUNDS
Hook 1 each of the clips (10) at the front below and
above behind as well as at the two lower left and right
front loops (11). Now clamp the background (12) at top
and bottom using the clips.
MOUNTING AND LED RAILS & CABLE CONNECTION
Slide the LED rails (4) into the rubber loops (5). The cable
connection points backwards, the LEDs to the front. Pass
the cable through the small rear opening (8) of the fabric
tent.
MOUNTING THE DIFFUSOR
In order to avoid refl ections, it is essential to mount
the diff usor (2).
Therefore, fi x the Velcro stripes of the diff usor onto the
Velcro holders (3) at all four top edges of the photo box.
CABLE CONNECTION VIA CONTROL UNIT
(Dimmer)
Connect the cables of the LED rails to the two connec-
tor plugs at the control unit (6). Then connect the single
plug of the control unit with one of the connector plugs
of the AC adapter (the second plug remains off function).
Connect the AC adapter to mains supply. Now you can
control brightness by pressing the +/- keys of the dimmer.
CABLE CONNECTION VIA AC ADAPTER
(Constant, full illumination performance)
Connect the cables of the LED rails with the two connec-
tor plugs of the AC adapter (7).
Connect the AC adapter to mains supply. This way you
can achieve a constant and full power illumination.