4
Transport, scope of supply and
storage
4.1
Transport
WARNING!
Raising heavy loads
Raising heavy loads without suitable hoist and
stopper material can cause major injuries.
– Transport heavy loads only by using suitable
hoists and stoppers.
WARNING!
Hovering load
Hovering loads can fall down and cause serious
injuries or death.
– Do not enter the area below hovering loads.
– Wear specified protective equipment.
– Only use approved hoists and stoppers.
– Ensure that the hoists and stoppers have
adequate bearing capacity.
NOTICE!
Incorrect Transport
Improper transportation of the pump may cause
the agitator the pumpto fall and suffer damage.
– Protect Pump from moisture.
– Protect Pump from vibrations.
– Use transport locks (e. g. against slipping).
Permissible ambient temperature during the
transportation for a few hours:
-40°C to 60°C
4.2
Unpacking
DANGER!
Electrostatically charged plastic films and
foils in potentially explosive areas
The foil can charge electrostatically at the time of
unpacking. Electrostatic discharge can cause
sparks that in explosive atmosphere can cause a
fire or an explosion. Serious injury and death
could be the consequence.
– Unpack product outside Ex zones.
1. Check the pump packaging for damage. If there
is any damage, notify the customer service
immediately
2. Remove packing film.
3. Dispose of the packaging professionally.
4. Check pump for damage.
5. Transport pump and muffler to the assembly
location without packaging film.
4.3
Scope of delivery
The scope of supply only includes the pump.
Personnel:
Mechanic
Protective equipment:
Protective gloves
Protective workwear
Anti-Static Safety Boots
1. Check the pump for integrity on receiving it.
4.4
Storage
Ambient Conditions
NOTICE!
Damage from improper storage
High load stresses o the packaging can damage
the product.
– Do not stack the packaging.
Observe the following environmental conditions for
the storage of the pump:
Temperature: 10-40°C
Humidity: 35 % – 90 %
Protection from direct sunlight
Protection from cold
Protection from vibration
Protection from dust and dirt
Do not store outdoors.
Store in a dry and dust-free place.
Do not expose to aggressive media.
Storage of Replacement Parts
The same storage provision as for the pump apply
to the replacement parts.
5
Assembly
5.1
Requirements for the Installation point.
Protect pump from vibration damage:
Erect mounting feet for the pump on horizontal
ground.
Transport, scope of supply and storage
01/2020
EcoPump AD - MPU00013EN
9/36
