CAUTION!
Low risk situations that can lead to minor
injuries.
NOTICE!
Situations that can lead to material
damage.
Additional information and recom-
mendations.
2.2
Intended Use
Use
The spray gun
Eco
Gun AS MAN EC is used
exclusively for hand guided electrostatic
coating of surfaces with non-flammable
paints. The coating process must be con-
ducted in a painting booth with suitable tech-
nical ventilation.
The spray gun
Eco
Gun AS MAN EC may
only be operated in the industrial area and
within the approved technical data
Eco
Gun AS MAN EC spray gun is
approved for use in Class I Division 1.
Permitted device combination
The spray gun must only be combined with
the following components:
Controller
Connection cable
Eco
HT 80 controller
(100 - 120V)
E80020003
Connection cable,
10m
E09070245
Eco
HT 80 controller
(200 - 240V)
E80020004
Misuse
If used incorrectly, it can cause serious inju-
ries or death.
Examples of wrong use are:
Aiming the spray gun at humans or ani-
mals
Use outside of an spray booth
Use without mechanical ventilation
Atomization of fluid nitrogen
Use of unapproved materials
Combination of the spray gun with com-
ponents that are not approved by Dürr
Systems for operation.
Unauthorized modifications
Use in explosive dust atmospheres or in
atmospheres with flammable fibers and
fluff
Use in other groups of substances,
except D
Use of the spray gun without knowing the
operating instructions
Labelling according to CSA
Class I, Div 1, Group D; Tamb + 0°C to +
40°C
2.3
Residual risks
High voltage
High voltage can be present on components
and cables. Electric shocks and discharges
can cause serious injuries and death.
Ground the spray gun.
Ground the work piece.
Connect any conducting objects and
paint containers in the paint booth to the
ground.
Remove not required objects such as
tools from the paint booth.
Wear antistatic safety boots during opera-
tion.
Wear antistatic protective gloves during
operation.
Do not touch the electrode during opera-
tion.
Safety
11/2019
EcoGun AS MAN EC - MSG00022EN
5/52
