Fig. 3: Assembly
2. Push spray gun with the fastening bore
(1) on the support bracket.
Alignment is arbitrary. Distance to
the work piece: 15 to 25cm
3.
WARNING!
Statically charges components may
cause explosions during operation!
Ground the spray gun through the fas-
tening bore or material connection lines, if
the support bracket itself is non-conduc-
tive or is not grounded. Ensure housing
contact.
Resistance between housing and
grounding terminal
≤
1M
Ω
.
Fig. 4: Connect
4.
The spray gun does not work
when the lines are not connected
correctly.
Connect lines. Ensure correct assign-
ment.
1 - Material (M)
2 - Spraying air (A)
3 - Control air (C)
Connect lines to both material con-
nections for paint circulation mode.
For tap line mode, connect line to a
material connection. Close the other
material connection with the locking
as accessory.
Assembly
02/2020
EcoGun AS AUTO pro HD - MSG00009EN
9/44
