DÖRR EcoGun AS AUTO pro HD, Operation Manual

Page: 8 / 44

3 Transport, scope of supply
and storage
3.1 Scope of delivery
The scope of supply includes the following
components:
Spray gun
Tool kit
Ä 12.1 “Replacement parts”
Inspect delivery on receipt for completeness
and integrity.
Report defects immediately
Ä “Hotline and
Contact”.
3.2 Handling of packaging material
ENVIRONMENT!
Incorrect disposal
Incorrectly disposed packaging material
can damage environment.
– Dispose of material no longer required
in an environment-friendly manner.
– Observe local disposal specifications.
3.3 Storage
Storage provisions:
Do not store outdoors.
Store Spray gun only when dry.
Store in a dust-free place.
Do not expose to aggressive media.
Protect from solar radiation.
Avoid mechanical vibrations.
Temperature: 10°C to 40°C
Relative humidity: 35% to 90%
4 Assembly
4.1 Requirements for the
Installation point.
The control air supply and the material
feed to the spray gun must be interrupted
and secured against reconnection.
Lines, seals and screw connections must
be designed to conform to the require-
ments of the spray gun Ä 11.5 “Operating
values”.
A support bracket capable of securing the
spray gun is required.
The control air supply must be adjustable.
The control air supply must have venting.
4.2 Assembly
Stationary assembly
Personnel:
Operator
+ additional qualification explosion pro-
tection
Protective equipment:
Protective workwear
Protective gloves
Observe the following at assembly:
Diameter of the fastening bore: 10mm
Nominal diameters:
Ä 11.2 “Connections”
1.
WARNING!
Sources of ignition may cause explo-
sions!
Ensure a non-explosive atmosphere.
Transport, scope of supply and storage
02/2020 EcoGun AS AUTO pro HD - MSG00009EN 8/44