DÖRR EcoGun AS AUTO pro HD, Operation Manual

Page: 6 / 44

2.2 Intended Use
Use
The Eco Gun AS AUTO pro HD spray gun is
solely intended for automatic coating of sur-
faces by one of the following operating
methods:
As independent, not hand guided device
As part of a semi- or fully automated paint
booth
As part of a paint robot
The material feed can be effected optionally
via the pressure line or under gravitation
(flow beaker).
The product is only intended for use in
industry and craftmanship.
The use is only permitted within the specified
technical data Ä 11 “Technical data”.
The spray gun is approved for use in explo-
sive areas of Ex zones 1 and 2.
Misuse
If used incorrectly, it can cause serious inju-
ries or death.
Examples of wrong use are:
Aiming the spray gun at humans or ani-
mals.
Atomization of fluid nitrogen
Use of unapproved materials
Combination of the spray gun with com-
ponents that are not approved by Dürr
Systems for operation.
Unauthorized modifications
Use in explosive areas Ex zone 0
EX labeling
II 2G T6 X
II - Device group II: all areas except
mining
2G - Device category 2 for gas
T6 - Temperature class T6: Surface tem-
perature, max. 85°C
X - Specific conditions for safe operation
The following conditions must be observed
for safe operation:
Ground spray gun and work piece.
Only use conductive lines.
Ensure that static electricity can be dis-
charged.
2.3 Staff qualification
WARNING!
Inadequate qualification
Wrong estimation of dangers can cause
serious injury or death.
– Only sufficiently qualified persons may
execute all work.
– Some work requires additional qualifi-
cation. Additional qualifications of spe-
cialized personnel are marked with a
“+”.
This document is intended for qualified per-
sonnel in industry and craftmanship.
Operator
The operator is trained specifically for the
field of work in which he works.
Furthermore, the operator possesses the fol-
lowing knowledge:
Technical Measures for occupational
safety and health
The operator is responsible for the following
work:
Operate and monitor the system/ product.
Introduce measures in the event of faults.
Clean system/ product.
+ additional qualification explosion pro-
tection
In addition to the knowledge of the various
specialist fields, the mechanic has knowl-
edge of regulations and safety measures
when working in potentially explosive areas.
Dürr Systems offers special product training
for Ä “Hotline and Contact”.
Safety
02/2020 EcoGun AS AUTO pro HD - MSG00009EN 6/44