Robot assembly
Personnel:
Operator
+ additional qualification explosion pro-
tection
Protective equipment:
Protective workwear
Protective gloves
For a robot assembly, the corresponding
robot version of the spray gun must be used
or the spray gun must be reconstructed with
the components of the optional robot kit
12.3 “Accessories” for robot version. The
regular inserts are exchanged here against
connecting pieces.
The reconstruction and the connection of the
robot version of the spray gun are described
below.
1.
WARNING!
Sources of ignition may cause explo-
sions!
WARNING!
Statically charges components may
cause explosions during operation!
Attach spray gun on the support bracket
as for the stationary assembly and
Fig. 4: Assembling robot accessories
2. Lock spraying air connection (A) with the
blind plugs of the robot kits (4).
3. Replace regulating inserts of the atomizer
air control (R) and the horn air control (F)
by the regulating inserts and the screw-in
plug connections of the robot kits (1 and
2).
4.
The spray gun does not work
when the lines are not connected
correctly.
Connect lines. Ensure correct assign-
ment.
1 - Atomizer air (R)
2 - Horn air (F)
3 - Material (M)
4 - Unused
5 - Control air (C)
Connect lines to both material con-
nections for paint circulation mode.
For tap line mode, connect line to a
material connection. Leave the other
material connection closed by
means of the sealing screw.
Assembly
02/2020
EcoGun AA AUTO - MSG00008EN
10/48
