DÖRR EcoGun AA AUTO, Operation Manual

Page: 8 / 48

3.2 Handling of packaging material
ENVIRONMENT!
Incorrect disposal
Incorrectly disposed packaging material
can damage environment.
– Dispose of material no longer required
in an environment-friendly manner.
– Observe local disposal specifications.
3.3 Storage
Storage provisions:
Do not store outdoors.
Store Spray gun only when dry.
Store in a dust-free place.
Do not expose to aggressive media.
Protect from solar radiation.
Avoid mechanical vibrations.
Temperature: 10°C to 40°C
Relative humidity: 35% to 90%
4 Assembly
4.1 Requirements for the
Installation point.
The control air supply and the material
feed to the spray gun must be interrupted
and secured against reconnection.
Lines, seals and screw connections must
be designed to conform to the require-
ments of the spray gun Ä 11.5 “Operating
values”.
A support bracket capable of securing the
spray gun is required.
The control air supply must be adjustable.
The control air supply must have venting.
The material must be fed through a filter
to avoid clogging of the nozzle.
4.2 Assembly
Stationary assembly
Personnel:
Operator
+ additional qualification explosion pro-
tection
Protective equipment:
Protective workwear
Protective gloves
Observe the following at assembly:
Diameter of the fastening bore: 10mm
Nominal diameters:
Ä 11.2 “Connections”
1.
WARNING!
Sources of ignition may cause explo-
sions!
Ensure a non-explosive atmosphere.
Assembly
02/2020 EcoGun AA AUTO - MSG00008EN 8/48