The higher the bore diameter, the more
the material flowing out. The greater the
angle, the broader is the spray pattern.
Control air pressure is controlled externally
via valves.
The spraying air pressure (A) is controlled
externally via valves. The horn air pressure
and atomizer air pressure can be adjusted
on the spray gun by means of the horn air
pressure (F) and the atomizer air control (R).
The material pressure is controlled externally
via valves.
2
Safety
2.1
Presentation of Notes
The following notes can appear in this
instruction:
DANGER!
High risk situation that can lead to serious
injuries or death.
WARNING!
Medium risk situation that can lead to
serious injuries or death.
CAUTION!
Low risk situations that can lead to minor
injuries.
NOTICE!
Situations that can lead to material
damage.
ENVIRONMENT!
Situations that can lead to environmental
damage.
Additional information and recom-
mendations.
2.2
Intended Use
Use
The
Eco
Gun AA AUTO spray gun is only
intended for use in industry and craftman-
ship.
The
Eco
Gun AA AUTO spray gun is solely
intended for automatic coating of surfaces by
one of the following operating methods:
As independent, not hand guided device
As part of a fully automated paint booth
As part of a paint robot
The material is fed through a high pressure
line.
The use is only permitted within the specified
The spray gun is approved for use in explo-
sive areas of Ex zones 1.
Misuse
If used incorrectly, it can cause serious inju-
ries or death.
Examples of wrong use are:
Aiming the spray gun at humans or ani-
mals.
Atomization of fluid nitrogen
Use of unapproved materials
Use of hose lines that are unsuited to the
material and operating pressure used.
Combination of the spray gun with com-
ponents that are not approved by Dürr
Systems for operation.
Unauthorized modifications
Use in explosive areas Ex zone 0
EX labeling
II 2G T6 X
Safety
02/2020
EcoGun AA AUTO - MSG00008EN
5/48
