DÖRR EcoGun 116, Operation Manual

Page: 4 / 44

1 Product overview
1.1 Overview
Fig. 1: Overview
1 Air cap
2 Cap nut
3 Material connection for flow cups
4 Flat jet control
5 Material flow control
6 Air connection
7 Air control
8 Trigger
1.2 Short description
The spray gun is intended for surface
coating. Compressed air is used to apply
material. The material to be atomized is fed
via flow cups. The spray gun is handheld.
Use a suitable nozzle set with air cap,
depending on the requirement Ä 6.3
“Selecting air cap”.
The following factors influence the spray jet
and the result:
Alignment of the air cap Ä 6.5 “Alignment
of the air cap”
Material flow
Ä 5 “Commissioning”
Air pressure
Ä
5 “Commissioning”
Horn air pressure Ä 5 “Commissioning”
The spray gun uses a self-adjusting needle
package. The needle gland automatically
adjusts for the material-related wear of the
needle gland. In addition, the needle packing
can be readjusted mechanically.
2 Safety
2.1 Presentation of Notes
The following notes can appear in this
instructions manual.
DANGER!
High risk situation that can lead to serious
injuries or death.
WARNING!
Medium risk situation that can lead to
serious injuries or death.
CAUTION!
Low risk situations that can lead to minor
injuries.
Product overview
05/2018 EcoGun 116 - MSG00017EN 4/44