DÖRR EcoGun 116, Operation Manual

Page: 16 / 44

For a thorough cleaning, you can remove the
filter.
Disassembling
Fig. 11: Cleaning filter
1. Pull out filter (1) on the holding pin from
the material connector.
2. Clean filter (1) in the cleaning bath.
3. Insert filter (1) in the material connector
and push down until it sits firmly.
Cleaning the air cap und nozzle
Personnel:
Operator
+ additional qualification explosion pro-
tection
Protective equipment:
Protective workwear
Protective gloves
For a thorough cleaning you can remove the
air cap and the nozzle.
Disassembly
Fig. 12: Disassembling the air cap and
nozzle
1. Loosen cap nut (1).
2. Remove the air cap (1).
3. Push trigger lever (3) through. Keep it
pressed.
ð The needle is pushed backwards so
that it will not be damaged during dis-
assembly of the nozzle.
4. Unscrew and remove nozzle (2) using
monkey wrench.
5. Release trigger lever (3).
6. Clean air cap (1) using cleaning agent
and cleaning brush
Ä
11.2 “Tools”.
7. Wipe the cleaned air cap dry with a cloth.
8. Clean nozzle (2) in the cleaning bath.
9. Clean nozzle seat with a cloth or a soft
brush.
Assembling
10. Push trigger lever (3) through. Keep it
pressed.
ð The needle is pushed backwards so
that it will not be damaged during
assembly of the nozzle.
Cleaning and maintenance
05/2018 EcoGun 116 - MSG00017EN 16/44