Doro Form 40, Manual

Page: 8 / 28

5
English
Call Barring
The telephone can block certain types of
outgoing calls. (PIN code is 0000 when sup-
plied).
Press
Menu
. Scroll to
HS Settings
. Press
Select .
Scroll to Call Barring . Press Select .
Enter PIN number (0000 when supplied).
Press Ok .
Scroll to Barring Mode . Press Select .
Scroll to desired setting, e.g. On . Press
Select .
Specifying barred numbers
Enter the sequence of digits for the type of
call to be barred. Example: Select the inter-
national prefix (usually 00) to bar all interna-
tional calls. There are 4 different bars with up
to 4 digits in each.
Access Call Barring as described above.
Scroll to Barring Number . Press Select .
Scroll to desired entry. Press Select .
Enter desired digits (max 4). Press Ok .
Remember to activate the Barring Mode
setting as described above.
System settings
System PIN is 0000 on delivery.
Press Menu . Scroll to Base
Settings . Press Select .
Scroll to desired function. Press Select .
Enter the desired setting. Press Select .
Delete HS To deregister a handset
Dial Mode Must be in tone in most
countries.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
1.
2.
3.
Flash Time Long = New Zealand.
Medium = France/Portugal
Short = Other countries UK/
Australia
Modify PIN
The code (e.g. 0000) can be
changed.
First Ring First ringer signal on/off. For
SMS etc.
BS default Resetting base unit.
Register a new handset
All handsets included in the
package are already registered
to the base unit.
Only for separate handsets/
service measures.You can register up to 6
handsets to one base unit.
This model is GAP (Generic Access Profile)
compatible, which means that the handset
and the base unit can both be used with
most other GAP compatible units irrespec-
tive of manufacturer. However the GAP pro-
tocol cannot guarantee that all functions
may be accessed. Extra handsets will not
be available as accessories.
Hold down the
J
button on the base unit
until the indicator flashes.
Press
Menu . Scroll to Registering . Press
Select .
Scroll to required base unit
(Blue=previous reg.). Press Ok .
Enter the base unit PIN code (e.g. 0000).
Press
Ok
.
If the registration is successful the unit
will return to standby mode within one
minute.
1.
2.
3.
4.
5.