Doro Form 40, Manual

Page: 12 / 28

9
English
Troubleshooting
Check that the telephone cord is undamaged
and properly plugged in. Disconnect any addi-
tional equipment, extension cords and other
phones. If the problem is resolved, the fault
is with some other equipment.
Test the equipment on a known working line
(e.g. at a neighbour’s house). If the equip-
ment works there the fault is probably with
your telephone line. Please report this to your
network operator.
No number shown when ringing
This function requires a Caller ID
subscription from your service provider.
Warning tone during a call/Not possible to
make calls
The batteries may be running low (charge
the handset).
The handset may be nearly out of range.
Move closer to a base unit.
Telephone does not work
Check that the adapter/phone cord is
connected correctly.
Check that you have selected Tone Dial,
see System Settings .
Check the charge status of the handset
batteries.
Connect another functioning telephone to
the network wall socket.
•
•
•
•
•
•
•
The telephone continues to ring
Some of the telephone’s ringers do not
follow the line signal, which means that
the signal may continue for up to
seconds after answering a call.
The answer machine is not answering
Memory may be full. Listen to/delete your
messages.
Check that the adapter/phone cord is
connected correctly.
Check that the answer machine is
switched on.
The answer machine does not respond to
remote access
Check that you are using a tone dial
telephone.
Try holding the buttons down longer,
approximately second per digit.
If the telephone still does not work, contact
the place of purchase for service. Don’t forget
the receipt or a copy of the invoice.
•
•
•
•
•
•