Doro Form 40, Manual

Page: 10 / 28

English
Screening
You can press
Ok
on the handset while a mes-
sage is being recorded.
The call can be intercepted by pressing or
by lifting the receiver of another telephone.
Using the answer machine
(handset)
New message is indicated in the display in
standby mode. Playback always starts with
new messages.
Press Menu . Scroll to Answer Machine .
Press
Select
.
Scroll to
Playback
. Press
Ok
.
During playback the following commands
are available or press Menu and scroll to the
desired function.
End by pressing
L .
2
( X ) Delete during playback
4
( 88 ) Previous message
5
(

) Stop
6
( 99 ) Skip to next message
Speaker Off/On
} / { Volume control
Delete all old messages
Press Menu . Scroll to Answer Machine .
Press
Select
.
Scroll to
Delete All
. Press
Ok
.
Confirm by pressing
Ok
.
1.
2.
3.
4.
1.
2.
3.
Answer Machine Settings
Press
Menu
. Scroll to
Answer Machine
.
Press Select .
Scroll to TAM Settings . Press Select .
Scroll to desired function. Press Select .
Scroll to desired setting. Press Select .
Answer Mode Choose between Answer &
Record and Answer Only (caller
cannot leave a message).
TAM Language Select language for pre-
recorded out-going message.
To activate this function select
Default under OGM Settings .
OGM Settings Record/listen to outgoing msg.
Answer Delay Select after how many rings
(2-9, Time Saver*) the call will
be answered.
Recording Time
Select maximum recording
time for each msg.
Remote Access Select remote access on/
off.
Chg Remote PIN Change remote access code
(0000).
*The Time Saver function answers calls
after six ring signals, until the first new
message has been registered - then the
answer machine switches to answering after
approximately two signals. This is useful
when using remote access; if you call up
the answer machine and there is no reply
after four rings that means there are no
messages recorded and you can hang up
before you are charged for the call.
1.
2.
3.
4.