Doro 530, Manual

Page: 28 / 36

English
28 www.doro.com
English
www.doro.com 29
Other
Troubleshooting
Check that the telephone cord is undamaged and properly plugged in.
Disconnect any additional equipment that may be connected. If the problem is
resolved, the fault is with the other equipment.
Test the equipment on a known working line. If the product works then the
fault is probably with the line. Please inform your local telephone company.
No number shown in display when ringing
- In order for this feature to function, you must subscribe to the Caller
Identification service from your network provider.
- If - - - - shows in the display, the call may be an international call (no data
received), or from a private or withheld number.
- It may not be possible to receive Caller ID information if the phone operates
in a PBX system.
Warning tone while talking/cannot connect
- The batteries may be running low (recharge the handset).
-
The handset may be (nearly) out of range. Move closer to the base unit.
- There may be a new message on the answering machine.
- Please try disconnecting one battery for a few of seconds, then reconnect.
Telephone does not work
- Check the adapter, is it correctly connected to the base unit and to the mains
power?
- Check that the telephone cord has been correctly connected to the base unit
and to the line socket.
- Check the charge status of the handset batteries.
- Check that the charge contacts in the hand and base unit are clean.
- Try connecting another telephone known to be in working order to the line
socket. If that phone works, then it is likely that the equipment is faulty.