Doro 530, Manual

Page: 22 / 36

English
22 www.doro.com
English
www.doro.com 23
The Answering Machine (540R)
Day/time stamp
The machine has a voice function that announces the day of the week and the
time when each message was recorded.
Setting day/time stamp
1.
Press and hold
H
until “Please set day and time” is announced.
2. Press
8 8
or
9 9
until the correct day of the week is announced (1=Monday,
2=Tuesday...). Press
H
to set.
3.
Press
8 8
or
9 9
until the correct hour is announced. Press
H
to set.
4. Press
8 8
or
9 9
until the correct minute is announced.
5. Press
H
to set and confirm the current setting.
Checking current day/time
Press
H
to check the current setting, e.g.: Thursday, eleven fifty.
Number of rings
The number of rings before the answering machine answers can be selected
between 2-9 rings or toll saver*.
1.
Press and hold
9 9
until the current setting is announced.
2. Press
8 8
or
9 9
until the required setting is announced.
3.
After a few seconds the setting will be saved.
*The Toll Saver function (Time Saver) will answer calls after six rings until the first new ICM
message has been recorded. The answering machine will then answer after approximately two
rings. This feature is useful when using the remote function for example; if you call home and
after four rings the answering machine does not answer, then no messages have been recorded
and you can terminate the call without incurring any charges. If on the other hand the machine
answers after two rings new messages have been recorded.