Doro 132, Manual

Page: 6 / 36

English
www.doro.com
Installation
Unpacking
The package contains:
- Handset - Mains adapter (6VDC 300mA)
- Base unit - Line cord
- 2 AAA batteries (Ni-MH 1.2V 600 mAh) - Belt clip
Expanded versions (e.g. +1) also include an additional handset, batteries, chargers and
adapters.
Important!
Only use original adapter (6VDC 300mA G060030D22)!
Connection
1.
Connect the mains adapter to the
F
socket on the base unit and to an electrical
wall socket.
2. Carefully remove the handset battery cover. Insert the batteries into the handset
ensuring correct battery polarity is observed, and replace the battery cover.
3. Place the handset in the base unit, with the keypad facing outwards. Once the
handset is correctly positioned in the base unit, a beep will be heard.
4.
Leave the handset to charge for 24 hours before using it for the first time.
5. Connect the line cord to the telephone plug and the
T
socket on the base unit.
6.
Plug into the telephone network wall socket.
7. To set the time/date please refer to page 23.
Only for models with an extra handset (+1):
8.
Connect the charger’s mains adapter to the
F
socket on the charger and to an
electrical wall socket.
9. Place the extra handset in the charger, with the keypad facing outwards.
10.
Leave the handset to charge for 24 hours before using it for the first time.
Important!
Only use original adapter (6VDC 300mA G060030D22)!
Under power failure conditions the telephone will not operate. Please ensure that a separate telephone not
dependant on local power is available for emergency use. The earpiece of the handset may attract small
ferromagnetic objects such as staples or pins, care should be taken when placing the handset near these
items. Do not place the base unit close to other electrical equipment such as TV sets, computer screens,
telecom equipment, fans, etc. This will minimise the risk of interference. Do not place the base unit in
areas where it will be exposed to direct sunlight or other major heat sources!