Doro 132, Manual

Page: 10 / 36

English
10 www.doro.com
Operation
Please note!
When programming all references to press = to press once and then immediately release the
button.
Making a call
1. Enter the required telephone number. Mistakes can be erased by pressing
C
.
2. Press
q
the telephone number will now be dialled.
3.
Press
q
again to terminate the call.
Receiving a call
1.
Wait for the handset to ring.
2. Press
q
to answer the call.
3.
Press
q
to terminate the call.
Please note!
If the telephone cannot connect to a line, a warning tone will be heard. The problem may be
due to the batteries running low, the handset being too far from the base unit or all of the
transmission channels being engaged.
Volume control
1. The speaker and earpiece volume may be adjusted during a call using
}
/
{
.
2.
Press
0
to save your settings.
Timer
Within approximately 10 seconds of the connection of a call, a timer will be
shown on the display. The timer is a simple way to help you keep track of how
long the call lasts.