Doro 132, Manual

Page: 27 / 36

English
www.doro.com 2
The Answering Machine (133R)
Setting up the answering machine
1.
Press
w
.
2.
Scroll to
Ans. machine
using
}
/
{
. Press
0
.
3. Scroll using
}
/
{
to Ans settings . Press
0
.
4.
You can listen to any voice prompts either on the handset or speaker by
simply pressing
5. Select a command (from below) by pressing the corresponding button one or
more times.
6.
Press and hold
C
to return to standby.
Command Function
1 .......................................... To hear the main menu, (press 2 to stop)
7 .......................................... Select normal answering mode/Answer only
8 .......................................... OGM playback
9 .......................................... Record new OGM, (press # to stop)
0 .......................................... Switch the answering machine on (
a
lit)/off
# .......................................... Select the number of rings
Please note!
The unit incorparates a remote activation facility, if the answering machine is switched off it
will still answer after 10 rings. Please refer to the remote activation chapter on the next page.
Number of rings
The number of rings before the answering machine answers can be selected
between 2, 4, 6, 8 or Toll Saver * by pressing
#
repeatedly.
*The Toll Saver function (TIME SAVER) will answer calls after six rings until the
first new ICM message has been recorded. The answering machine will then answer after
approximately two rings. This feature is useful when using the remote control; if you call
home and after four rings the answering machine does not answer, then no messages have been
recorded and you can terminate the call without incurring any charges. If on the other hand
themachine answers after two rings new messages have been recorded.