Doro 132, Manual

Page: 22 / 36

English
22 www.doro.com
System Settings
PBX function
This telephone has a PBX function that will automatically insert a pause
between the first and second digits of the telephone number before dialling.
For Example:
When the function is activated dialling a phone number ie: 0123456, the
telephone will dial 0 followed by a pause and then the remaining part of the
number 123456.
1.
Press
w
.
2. Scroll to Setup BS using
}
/
{
. Press
0
.
3.
Scroll using
}
/
{
to
Access code
. Press
0
.
4. Enter the required prefix number. Use
C
to erase/delete.
5.
Press
0
to confirm.
Reset base unit defaults
Resetting will return most functions to the original factory default setting.
1.
Press
w
.
2. Scroll to Setup BS using
}
/
{
. Press
0
.
3. Scroll using
}
/
{
to Set back . Press
0
.
4.
Enter the PIN number (0000 when supplied). Press
0
.
5. Press
0
to confirm.
Date/time
In some countries CID subscribers have the time and date updated
automatically when a call is received, in other countries the time and date must
be set manually.
The time and date must be reset in the event of a power cut or if the base unit
has been disconnected. However, the time/date is retained even if the batteries
are discharged.
The time and date only requires setting on one of the handsets.
1.
Press
w
.
2. Scroll to Date/time using
}
/
{
. Press
0
.
3.
Enter the year using the handset keypad (20XX). Press
0
.
4. Enter the date using the handset keypad (DD.MM). Press
0
.
5. Enter the time using the handset keypad (HH:MM). Press
0
to confirm.