Dorner Mfg. Corp.
8
851-712 Rev. C
Ready-To-Run Mini Conveyors
Installation
Figure 3
Figure 3
Installation Component List
Figure 4
Figure 4
Required Tools
• Hex-key wrenches:
4 mm, 5 mm
• Level
• Torque wrench
Recommended Installation
Sequence
• Attach mounting brackets to conveyor (see “Support Stand
Mounting Brackets” on page 8 for stand mounting brack-
ets and see “Surface Mount Brackets” on page 9 for sur-
face mounting brackets).
• Attach conveyor to stands (see “Stand Attachment” on
page 10).
• Install stand cross brace
• Install variable speed controller
Support Stand Mounting Brackets
1. Locate brackets. Exploded view shown in Figure 5.
Figure 5
Figure 5
2. Remove screws
(Figure 5, item 1 & 2)
, washers
(Figure 5, item 3)
, nuts
(Figure 5, item 4
) and T-bars
(Figure 5, item 5)
from brackets.
3. Insert T-bars
(Figure 5, item 5)
into conveyor side slots
(Figure 6, item 1)
. Fasten brackets
(Figure 6, item 2)
to conveyor with mounting screws
(Figure 6, item 3)
.
Figure 6
Figure 6
NOTE
Conveyor MUST be mounted straight, flat and
level within confines of conveyor. Use a level
(Figure 3, item 1) for setup.
1
Conveyor with Gearmotor Mounting Package
2
Variable Speed Controller (Optional)
3
Support Stand (Optional)
4
Support Stand Mounting Brackets (Optional)
5
Adjustable Stand Cross Bracket (Optional)
6
Surface Mount Brackets (Optional)
1
3
5
1
2
4
6
1
5
4
3
2
1
3
2
6
4
5
