Dorner Mfg. Corp.
12
851-712 Rev. C
Ready-To-Run Mini Conveyors
Installation
2. Install T-bars
(Figure 20, item 1)
into T-slots of
conveyor.
Figure 20
Figure 20
3. Attach controller to conveyor with two screws
(Figure
21, item 1)
.
Figure 21
Figure 21
4. Slide controller to its desired mounting location along
conveyor and tighten both screws.
Variable Speed Controller Mounting to
Stand Leg
1. Assemble mounting clips
(Figure 22, item 1)
with
screws
(Figure 22, item 2)
to the side of the controller.
Figure 22
Figure 22
2. Install T-bars
(Figure 23, item 1)
into T-slots of stand
leg.
Figure 23
Figure 23
3. Attach controller to stands with two screws
(Figure
23, item 2)
.
4. Slide controller to its desired mounting location along
conveyor and tighten both screws.
A
WARNING
Exposed moving parts can cause severe
injury.
LOCK OUT POWER before removing guards
or performing maintenance.
1
1
1
2
1
2