Dorner Mfg. Corp.
10
851-712 Rev. C
Ready-To-Run Mini Conveyors
Installation
Adjustable Cross Brace
Required Tools
• 5 mm hex key wrench
• Torque wrench
Illustration References:
Figure 11
Figure 11
Stand Attachment
1. Loosen screw
(Figure 12, item 1)
of adjustable bar
(Figure 12, item 2)
.
Figure 12
Figure 12
2. Install T-bar
(Figure 13, item 1)
in inner T-slot of stand
leg
(Figure 13, item 2)
.
Figure 13
Figure 13
3. Loosely attach adjustable bar
(Figure 14, item 1)
or
(Figure 15, item 1)
to aluminum stand T-slot as
required.
• Attach outer tube end with screw
(Figure 14, item 2)
.
Figure 14
Figure 14
• Attach inner channel end with screw
(Figure 15, item 2)
.
Figure 15
Figure 15
A
WARNING
Exposed moving parts can cause severe
injury.
LOCK OUT POWER before removing guards
or performing maintenance.
1
M6 T-Bar (2x)
2
Adjustable Bar
3
M6 x 40 mm Socket Head Screw (2x)
1
3
2
2
1
1
2
2
1
2
1