3 Product description
3.1 Principle of operation
TENSOR double action hinges secure the glass door
leaf between the base and the counter plate. The
varying glass thickness is compensated by gaskets.
3.2 Product variants
There are 3 product variants for different installation
situations.
3.2.1 Wall mounting with surface
mounted mounting plate
Fig. 39
Gaps for wall mounting with surface mounted
mounting plate
3.2.1.1 Scope of delivery
‣ 2 x double action hinge (Fig. 40/ 1)
‣ Gaskets each 4 x with 3 various thickness levels:
1 mm, 2 mm, 3 mm (Fig. 40/ 2)
‣ 12 x cover cap in 3 different colors (Fig. 40/ 3)
‣ 8 x countersunk screw M6 x 12 (Fig. 40/ 4)
‣ 2 x mounting plate (Fig. 40/ 5)
Fig. 40
1
3
4
5
2
Scope of delivery for the wall mounting with surface
mounted mounting plate
2.1.2 Specifications for the glass
door leaf
dormakaba recommends using TSG-H (heat soaked
toughened safety glass) according to DIN EN 12150-1.
‣ Glass thickness 8, 10 or 12 mm.
‣ No self-cleaning coatings.
‣ No glass surfaces of heavily varying thickness.
‣ No glass with conchoidal fractures and/or damaged
edges.
2.2 Requirements for the wall and
the mounting material
‣ The substructure/wall must be permanently
sustainable, flat and vertical.
‣ The mounting material must be suitable for the
substructure/wall and its dimensions must fit the
door leaf weight. The mounting material is not
included in delivery.
‣ Refer to the technical specifications of the
mounting material.
2.3 General safety instructions
‣ Mounting must be carried out by two people.
‣ Protective clothing must be worn.
‣ Place glass door leaves on wood for storage and
prevent it from falling.
‣ Secure the installation site.
2.4 Identification label
No further warranty is provided if the identification
label has been damaged or removed.
Fig. 38 Identification label on the TENSOR double action hinge
15
TENSOR
2017-11
WN 059361 45532
dormakaba Mounting instructions
Product description
