Dorma MATRIX AIR, Manual

Page: 27 / 192

3 DORMA
MATRIX AIR DOOR FITTING
—
2. For your safety
2.1 General safety instructions
The door fitting may be installed only in approved mounting positions. A different use other
than specified is not permitted. Legal regulations have to be observed and may prohibit the
use on fire doors and smoke control doors.
2.2 Product-specific safety instructions
The door fitting contains sensitive electronic components. Protect the door fitting against
unintended impacts and shocks. Follow the instructions in this manual for the assembly of
the door fitting.
Installation on fire and smoke control doors
For fire doors: The use of the fire protection/smoke protection kit in combination with
DORMA FS door handle FR is required (compliance with EN 1634-1, fire resistance class
E1290). A verification of suitablity for the respective fire and smoke control door may be
required.
Installation on escape doors
The installation in the direction of escape is
not
allowed. The installation against the
direction of escape (e.g. as an outer access device in combination with emergency door
locks) is permitted when combined with a door handle set approved in accordance with EN
179. This set must be suitable for use with a handle square according to DIN 18255.
Installation in explosive areas
The MATRIX AIR door fitting may
not be
used in explosive areas.
The device is rated as a class 2 radio transmission
system in accordance with the R&TTE directive 1999/5/EC.
The frequency bands are not harmonized. In some countries, the operation may not be
permitted or may be subject to restrictions.
Device with an internal power supply EN 60950-1. Exposure of people to
electromagnetic fields EN 50364 and EN 62479.
EN