DORIC OTPG 4, User Manual

Page: 11 / 16

Figure 2.11:
Channels Configuration of the Input Mode Interface
2.2 Control and Settings
The Control and Settings box is used to manage the different parts of the software. It contains three tabs, the
Acquisition , Configuration , and View Tabs.
2.2.1 Acquisition Tab
1 2
3
4
5 6
Figure 2.12:
Acquisition Tab
The different buttons and fields of the Acquisition Tab are shown in Figure 2.12 and their functions are explained
below.
1. The Live button starts all the configured channels without recording their signal.
2. The Record button starts all the configured channels and record the signal for each of them at the defined
Sampling Frequency . The recorded datas are saved in a .doric file (hdf5 based file) where the saved path and
filename can be defined through the Saving Options button.
3. The Stampling Frequency field defines the frequency at which the recorded signal (using the Record button)
is sampled. Note: In Doric Studio version 6 and later, the record button also saves the configuration of the
OTPG (channel parameters, sampling frequency, ...) in the same .doric file. Use the Load config button (see
section 2.2.2 ) to load this parameters.
Chapter 2. Operations Guide
11