DORIC LEDFRJ Series, User Manual

Page: 3 / 21

1
General Overview
1.1 LED + Fiber-optic Rotary Joint
The Doric LED + Fiber-optic Rotary Joint are rotary joints integrated with one or several LEDs. This allows higher through-
put in comparison with conventional Fiber-optic Rotary Joints combined with a Connectorized LED light source .
1.1.1 Connectorized LED with Fiber-optic Rotary Joint
(a) Standard mount (b) Rotor (Yellow) and stator (black)
Figure 1.1: Connectorized LED with Fiber-optic Rotary Joint
The Connectorized LED with Fiber-optic Rotary Joint is a rotary joint with a single integrated LED. The light source is inte-
grated into the Stator (Black) , with the light leaving through the Rotor (Yellow) (Fig. 1.1b ). It has the following elements.
• The M8 connector port is used to provide power to the LED. The pinout can be found in Figure 4.1 .
• The Beam aperture outputs light. The standard model uses an FC-type connector.
3