BFP SYSTEM :
Quick Starting Guide
A- Trigger Mode =
Triggered
You should click LIVE or RECORD in the Acquisition Tab to have device ready to record, and recording
will start as soon as the selected DIO receive 'TTL-high' signal (5V). Recording will stop when you
manually click STOP in the software interface.
B- Trigger Mode =
Gated
You should click LIVE or RECORD in the Acquisition Tab to have device ready to record, and recording
will start when the selected DIO receive 'TTL-high' signal (5V). Recording will continue as long as the
DIO is 'TTL-High', then data stream will interrupt when the DIO is 'TTL-low', but the time will continue,
and when the DIO is back to 'TTL-High', the recording will continue until you manually click STOP in the
software interface.
Copyright © 2020 Doric Lenses Inc. All Rights Reserved.
9 / 15
