BFP SYSTEM :
Quick Starting Guide
3.3. BFP Driver 'BFPD'
The BFP Driver 'BFPD' synchronize the LED driver with camera acquisition in an interleave mode. There
is also 3 Digital Input or Output to synchronize the BFP system with other equipment.
Connect LED trigger cables between the LEDD IN (back-BNC) for channels #1,2,3 and corresponding
channels on BFPD EXC #1, 2, 3 (BNC).
3.4. USB hub
Use the jack Y-splitter to power the LED driver and the USB hub.
Connect the USB3 cables between cameras and the USB hub port 1 and 2.
Connect the USB2 cable between the LED driver and the USB hub port 3.
Connect the USB2 cable between the BFPD and the USB hub port 4.
**** it is important to have installed camera USB driver first as per step 2.1 before to continue ***
Connect USB3 cable from USB Hub to PC and wait until all devices are recognized and all drivers are
installed
Copyright © 2020 Doric Lenses Inc. All Rights Reserved.
5 / 15
