OP000524
4-1
Inspection, Maintenance and Adjustment
OP000524
4
Inspection, Maintenance
and Adjustment
PREVENTIVE MAINTENANCE
Routine maintenance and inspections are required to keep
your machine in the correct operating condition. The
following pages list the inspection intervals, the system or
component checks, and location references.
NOTE:
The following pages list the service checks and their
required intervals. The service cycles may need to be
shortened depending on the working conditions.
Extremely hot or dusty conditions will require more
frequent service. Operational hours are determined
by the amount of time accumulated on the engine
hour meter on the control console in the cabin.
Product Identification Number (P. I. N.)
Location
A P.I.N. number, is stamped on the main frame, under the
boom foot (Figure 2). It is also stamped on the product
identification plate (Figure 3) on outside of the cabin in front.
NOTE:
Please make note of these numbers and their
locations. These will be required whenever warranty
or service work is requested. Keep this number on
file, incase the machine is stolen.
Figure 1
HAOA601L
Figure 2
FG009247
Summary of Contents for DX27Z
Page 2: ......
Page 6: ...K1028289E Table of Contents IV ...
Page 58: ...OP000522 Safety 1 52 ...
Page 188: ...OP000524 Inspection Maintenance and Adjustment 4 60 ...