OP000524
Inspection, Maintenance and Adjustment
4-2
Component Serial Numbers
There are many serial numbers on each traceable
component of the machine. For example, the engine serial
number is stamped on the rear left side of the engine block,
above the starter. Additional engine information is described
on a label (Figure 4) on the rocker cover.
Please make note of these numbers and their locations.
These will be required whenever warranty service work is
requested.
Safety Precautions
1.
Make sure to lock out the hydraulic controls and post a
notice (Warning Tag) that the machine is being
serviced to prevent any unauthorized operation.
2.
Make sure to clean up any fluid spills, especially
around the engine.
3.
Inspect all fuel lines to make sure that fittings, lines,
filters and O-rings, etc., are tight and are not showing
signs of wear or damage.
4.
If the inspection or test procedure requires that the
engine be running, make sure to keep all unauthorized
personnel away from the machine, and that all industry
standard safety precautions are followed.
FG009008
K1011647B
K1011647B
Incheon, Korea
7-11, Hwasu-dong, Dong-gu,
Figure 3
Figure 4
FG007659
Summary of Contents for DX27Z
Page 2: ......
Page 6: ...K1028289E Table of Contents IV ...
Page 58: ...OP000522 Safety 1 52 ...
Page 188: ...OP000524 Inspection Maintenance and Adjustment 4 60 ...