Doosan A0509 Page 29 User Manual Download

Page: 29 / 253

Starting Up the Robot

3.1

System Power-Up

Press and hold the power button on the upper left of the teach pendant.

•

The power for systems such as the robot, controller and teach pendant is turned on.

•

Once the system is powered on, the LED indicator for the robot lights up.

•

Press the shutdown button on the teach pendant or press and hold the power button on the
upper left of the teach pendant for 2 seconds.

The shutdown popup is displayed on the screen.

Press the OK button on the shutdown popup to properly shutdown the system.

Note

If the system does not power up, check the power switch at the bottom of the controller.

Summary of Contents for A0509






























































































































































































































































Search results

Summary of Contents for A0509

Reviews:

Related manuals for A0509

Brands by name

Popular brands

Doosan A0509, User Manual

Search results

Summary of Contents for A0509

Reviews:

Related manuals for A0509

Brands by name

Popular brands