14 FT 2-PIECE OCTAGON ARM ASSEMBLY
Assemble 2-Piece Arm
DoorKing Part Number
1601-567
14 Ft 2-Piece Octagon Arm Kit
This kit is designed
for use on a 1601 barrier gate operator
ONLY
. It has 2-7 ft arm sections that
assemble into a 14 ft arm.
7 Ft Arm Section with Coupler installed
7 Ft Arm Section
Coupler
Slide coupler all the way to the end of arm
Drawing NOT to scale
Pre-drilled Hole
Install End Cap
Push a screwdriver through the hole in cap to
release spring
while
pushing cap on. Keep pushing
cap on until a “
CLICK
” is heard, locking it in place.
120 S. Glasgow Avenue
Inglewood, California 90301
U.S.A.
Self-tapping screw
Self-tapping screw
Slide coupler in arm
all the way to the end of arm
and secure with screws.
This protects arm from arm sleeve bending/breaking the arm during break-away, see page 3.
Note:
Holes are pre-drilled in the arm section, but
not
in the coupler.
Remove plastic cap
Se
lf-tapping screw
9
1601-269-G-7-21
