120 S. Glasgow Avenue
Inglewood, California 90301
U.S.A.
RUBBER BUMPER INSTALLATION
Installation
DoorKing Part Number
8080-089
This rubber bumper is designed
to install on a 14 ft aluminum
octagon arm
(not included) for a 1601 barrier gate operator.
It
CANNOT
be used with a 1602 or 1603 operators.
Push a screwdriver through the hole in cap to release
spring
while
pushing cap on. Keep pushing cap on
until a “
CLICK
” is heard which locks it in place.
Reinstall End Cap
Tip:
Liquid soap will help rubber bumper
slide on easier.
Slide on Rubber Bumper
2
3
Octagon Arm
Rubber Bumper
Rubber Bumper
3” Trim End
3” Trim End
Remove End Cap
Push a screwdriver through hole in bottom of end cap
to release spring
while
pulling cap off.
3” trim end
MUST
slide
on as shown.
1
Cover
The 3” trim end
MUST
side on first and the end
fits into the cover, see cover illustration.
11
1601-269-G-7-21
