Cable Run Options
Choose which side of the operator the arm is mounted on,
remove knock-out and run wire harness accordingly as shown.
Install Harness (1601-356)
Far
Side
Option
Knock-Out
Knock-Out
Wire Harness Secured
to T
op of Cabinet for
FA
R
side option
Included Adhesive
Zip T
ies
Note for Older Operators:
A 5/8”
hole will have to be drilled in the
operator cabinet approximately
where Knock-Out is shown. Make
sure 5/8” hole is clear of all
internal components.
IMPORTANT:
Allow slack in the
wire harness between the cable
grips of
at least 13”
or more
for the rotating arm.
IMPORTANT:
Allow slack in the
wire harness between the cable
grips of
at least 13”
or more
for the rotating arm.
Near
Side
Option
Cable Grip
See page 7 for
arm connection
options.
See page 7 for
arm connection
options.
Cable Grip
Cable Grip
Cable Grip
Wiring to operator:
See page 8.
Option #2
Option #1
Breakaway
Sensors
Breakaway
Sensors
Attach wire harness connector on
bottom
of bracket as shown.
Attach wire harness connector on
bottom
of bracket as shown.
Optional Reverse Edge
Optional Reverse Edge
Harness Bracket
Attachment
See page 7 for arm connection
options
and securing wires to bracket.
DoorKing Part Number
1601-295
Spacer
MUST
be in
position when installing a
Optional
reverse edge.
See page 10.
4
1601-269-G-7-21
