DoorHan SHAFT-20, Installation And Operating Manual

Page: 3 / 12

3
SAFETY INSTRUCTIONS
1.2. TECHNICAL SPECIFICATIONS
Specifications Values
Power supply, V/Hz 220-240/50
Power demand, W 300
Torque, Nm 20
Motor speed, rpm 1400
Shaft hole, mm 25,4 (with key way)
Intensity, % 50
Thermal protection, °С 120
Protection class IP 20
Dimensions, mm 230x250x170
Weight with control unit, kg 8,5
Operating temperature range, °С -20…+55
№
Name Quantity
1
Operator with control unit 1 pc.
2
Mounting bracket 1 pc.
3
Remote control push-button panel 1 pc.
4
Locking ring 1 pc.
5
Set of fastenings 1 set
6
User manual 1 pc.
1.3. DELIVERY SET
Upon receiving the operator, unpack it and inspect visually. Make sure, that the operator is not damaged. If
any damages are found, please contact your supplier.
The operator components included in the standard package are listed in the following table.
2. SAFETY INSTRUCTIONS
• Follow all instructions since incorrect installation can lead to severe injuries.
• Shaft-20 is designed for automation of residential sectional doors. Do not use the operator for other than
intended purposes.
• DoorHan shall not be liable in case of personal injury caused by misuse of the product.
• Prior to installation of the operator make sure that the door is balanced and moves smoothly.
• Installation must be performed in accordance with the standards EN 12453 and EN 12445. These requirements
are to be met in non-EU countries for ensuring the required safety level.
• Check if the door conforms to the standards EN 12604 and EN 12605 (see documentation accompanying the
door). For non-EU countries the above mentioned requirements shall be met in order to obtain an appropriate
safety level.
• Mechanical door units shall conform to the standards EN 12604 and EN 12605.
• Prior to installation of the operator check that its location is suitable by its climatic conditions to technical
specifications of the operator.
• Do not install the operator in premises containing quick inflammable substances or other hazardous media
as it can cause explosion or fire.
• During operator assembly, installation and adjustment use tools specified in section «Tools» of this manual.
WARNING! It is important for the safety of persons to follow safety instructions carefully. Keep these
instructions.