DoorHan Sectional-500, Installation And Operating Manual

Page: 10 / 20

10
To delete panels from the receiver memory, press and hold down the button “S” for 8–10 seconds, until the indicator (dot)
at the bottom of the display goes out, and the short sound signal is heard.
TO ERASE A REMOTE CONTROL
Pressing the “+”, select “1”. Press and hold “P” for 5 seconds. The number “0” will appear on the display. Programming is
over.
ALARM ACTUATION AFTER 2 000 CYCLES
PAUSE TIME SETUP
TO FINISH PROGRAMMING
Press the “–”, the
“8” will light
S
P
+
-
By pressing “+” and “–”, select
the function value: “0” — off, “1” — on
Press “P” Press “P” in order
to store
1) You should press and hold down the button “S”, until the indicator (dot) at the bottom of the display lights up. Release
the button.
2) Select the button on the control panel, with the help of which you will control the operator’s work, and double press it.
3) Repeat operations for other panels (maximum quantity — 16 pc.).
Remote control programming
TO ADD A REMOTE CONTROL
S
P +
-
S
P +
-
S
P +
-
Press the “–”,
the “7” will light Press “P” Нажмая «+» и «–» выбирите значение
функции: «0» — выкл., «1» — вкл.
Нажмите «P»
для сохранения
информации
Press the “–”,
the “7” will light By pressing “+” and “–”, select the function value: “0” — without automatic
closing, “1” – 30-second pause, “2” — 60-second pause, …, “8” —
240-second pause. Afterwards press “P”
S
P
+
-
Press “P”
ELECTRICAL CONNECTIONS