DongFeng DFA1101GZ5AD6J-907, Service Manual

Page: 59 / 175

Transmission
MT-34
3.Install the reverse gear shaft assembly, and then install
the locking spacer on the shaft;
Tightening torque: 20~26N.m
4.Measure the end clearance and backlash of the reverse
gear, and you should assure the observed value among
the repair standard;
End clearance: repair standard: 0.3~0.6mm
Backlash: repair standard: 0.15~0.25mm
5.Install the mainshaft assembly;
6.Install the countershaft rear bearing cover and gasket;
Tightening torque: 59~79N.m
7.Install the flexible joint, oil seal and the driven gear of
the speedometer;