DongFeng DFA1101GZ5AD6J-907, Service Manual, Page: 110 / 175

Suspension
SP-10
4.Install the rear end of the spring, align the lifting eye hole
to t spring eye, insert the spring pin, then install the lock
nut;
Tightening torque 32~42N · m
Note:When inserting the cotter pin, make the inclined
face contact to the face of lifting eye pin.
5.Install the underplate, sub-spring and cover board to the
upper of the rear spring, then install the U-bolt;
6.Lift the rear end of the vehicle by a jack, take down the
support under the frame then down the jack;
7.Install the U-bolt underplate and damper lower bracket;
8.Install the U-bolts and nuts and tighten;
Tightening torque: 300~350N · m
9.Add grease to the leaf spring pin and lifting eye pin;
10.Install the rear damper by referring to the assembling method of the front damper.