Dong Feng ZB25, Operator'S Manual

Page: 17 / 112

Factory Direct Tractors
Safety Precautions
• Keep ROPS installed properly
Make certain all parts are reinstalled correctly if the roll-
over protective structure (ROPS) is loosened or removed
for any reason. Tighten mounting bolts to proper torque.
The protection offered by ROPS will be impaired if ROPS is
subjected to structural damage, is involved in an overturn
incident, or is in any way altered by welding, bending,
drilling, or cutting. A damaged ROPS should be replaced,
not reused.
• Practice safe maintenance
Understand service procedure before doing work. Keep
area clean and dry.
Never lubricate, service, or adjust machine while it is
moving.
Keep hands, feet, and clothing from power-driven parts.
Disengage all power and operate controls to relieve
pressure.
Lower equipment to the ground. Stop the engine. Remove
the key. Allow machine to cool.
Securely support any machine elements that must be
raised for service work.
Keep all parts in good condition and properly installed. Fix
damage immediately. Replace worn or broken parts.
Remove any buildup of grease, oil, or debris.
On self-propelled equipment, disconnect battery ground
Cable (-) before making adjustments on electrical systems
or welding on machine.
On towed implements, disconnect wiring harnesses from
tractor before servicing electrical system components or
welding on machine.
S-12