Installation, Operation and Maintenance manual
11
PowerCore
®
Dust Collectors - Series CPC
1
1
2
3
2
4
2
3
2
4
5
1
Hexagonal nut
2
Flat washer
3
Leg
4
Hexagonal bolt
5
Cross bracing
Figure 4: Support assembly
CPC-6, CPC-8 and CPC-12 assembly
Refer also to figures 2, 3 and 4.
1. Assemble support by attaching cross bracing to legs using hardware supplied.
Do not tighten hardware at this stage.
All bracing require fitting.
2. Lift support assembly into required position and ensure assembly is level.
3. Drill through base holes and insert suitable foundation bolts (if required, details
of foundation fixing positions are provided in Publication 3021).
Foundation bolts are not supplied by Donaldson.
4. Tighten foundation bolts, legs and cross bracing.
5. Apply sealant to top flange of dirty air plenum, each side of hole pattern.
