background image

 Torit Backward Inclined Fan, TBI-3 through 30

 2

Description

Torit Backward Inclined (TBI) Fans provide a convenient, 

cost-effective method of integrating a high efficiency fan 

with a Donaldson

®

 Torit

®

 dust collector. The TBI mounts 

directly to the clean-air outlet of the dust collector, 

eliminating costly transition ducts, and reducing the 

footprint of the system. 

Operation

The TBI Fans feature a backward inclined fan wheel 

which provides high efficiency operation. It also has 

direct drive operation to eliminate maintenance of fan 

bearings and belts. TBI Fans have computer balanced 

fan and motor assemblies to ensure vibration-free 

operation. When mounted to a Donaldson Torit Dust 

collector, the fan is designed to pull air through the 

collector to be filtered. Cleaned air exits the collector via 

the outlet of the TBI Fan.

Inspection on Arrival

1.  Inspect equipment and parts on delivery
2.  Report any damage to the delivery carrier.
3.  Request a written inspection report from the Claims 

Inspector to substantiate any damage claim.

4.  File claims with the delivery carrier.
5.  Compare equipment and parts received with 

description of product ordered.

6.  Report incomplete shipments to the delivery carrier 

and your Donaldson Torit representative.

7.  Remove crates and shipping straps. Remove loose 

components and accessory packages before lifting 

parts from truck.

8.  Check for hardware that may have loosened during 

shipping.

9.  Use caution removing temporary covers.
10.  The fan and accessories should be inspected on 

receipt for any shipping damage. Turn the wheel by 

hand to see that it rotates freely and does not bind. If 

dampers are provided, check for free operation of all 

moving parts.

Summary of Contents for TBI 10





















Reviews: