DOMUSA TEKNIK LIGNUM NG 20 Installation And Operating Instructions Manual Download

Page: 2 / 44

Thank you for choosing a DOMUSA TEKNIK heating boiler. From the range
of

DOMUSA TEKNIK

products you have chosen the

Lignum NG

model.

With a suitable hydraulic installation and with firewood for fuel, this high-

efficiency wood boiler will provide the ideal level of comfort for your

home.

This manual forms an essential part of the product and it must be given to

the user. We recommend you read the warnings and recommendations in
the manual carefully, as they contain important information on the safety,

use and maintenance of the installation.

These boilers must be installed by qualified personnel only, in accordance

with the legislation in force and following the manufacturer's instructions.

Incorrect installation of these boilers could result in damage to people,
animals or property, and the manufacturer will hold no liability in such

cases.

Summary of Contents for LIGNUM NG 20













































Search results

Summary of Contents for LIGNUM NG 20

Reviews:

Related manuals for LIGNUM NG 20

Brands by name

Popular brands

DOMUSA TEKNIK LIGNUM NG 20, Installation And Operating Instructions Manual

Search results

Summary of Contents for LIGNUM NG 20

Reviews:

Related manuals for LIGNUM NG 20

Brands by name

Popular brands