10.1. Fluff filter
This is accessed directly by opening the drawer in the middle part of the dryer, just below the door for
loading and unloading the clothes. It is designed to separate fluff and possible solid materials that
come off the dried material, so that they do not enter the propeller of the extraction fan. The fluff
accumulates in the filter.
The drawer has two catches that should be pressed together at the same time in order to release the
drawer. These catches also serve as handles and once the drawer has been released, pull the catches
outwards until reaching the limit. The drawer is fitted with telescopic guides to allow it to be pulled out
far enough so that the filter is totally accessible.
The filter is made of stainless-steel mesh for a longer life. The filter should be cleaned with a brush that
is not made with metal or hard bristles. Protective gloves should be worn if cleaning the filter directly by
hand.
It is advisable to clean the filter every 10 hours of operation at least. for maximum efficiency it is
recommended to clean it more often.
THE PERFORMANCE OF THE DRYER LARGELY DEPENDS
ON GOOD MAINTENANCE (CLEANING) OF THESE ELEMENTS
43