Doms PSS 5000 Technical Manual Download Page 72

Page: 72 / 155

72 of 155

PSS5000/TEMA/803046/14

PSS 5000 – Technical Manual

6 Operation (Menu 3)

To check the validity of a
card

The

Card Check

menu enables you to check if a card is included in the white

list loaded in the PSS 5000.

Select

3 Operation



3.4 Payment Server



3.4.1 Card Check

The

Card Check

page appears.

Type in the 20 digit number for the card and click

Check

Information about the validity of the card appears.

6.5

Operation Mode (Menu 3.5)

Description of the
Operation Mode

The operation mode for specific forecourt device can be changed by using the

Operation Mode

menu.

Some application dependant operation modes might be available for special
purposes such as disabling intrusion detection of an OPT, or setting an OPT in
maintenance mode to perform various technical tests on the OPT.

Summary of Contents for PSS 5000




























































































































































Search results

Summary of Contents for PSS 5000

Reviews:

Related manuals for PSS 5000

Brands by name

Popular brands

Doms PSS 5000, Technical Manual

Search results

Summary of Contents for PSS 5000

Reviews:

Related manuals for PSS 5000

Brands by name

Popular brands