134 of 155
PSS5000/TEMA/803046/14
PSS 5000 – Technical Manual
C Virtual File System
C Virtual File System
Overview
The information about the virtual file system is divided into the following top-
ics:
•
‘C.1 The Virtual File System’ on page 134
•
‘C.2 System Setup’ on page 134
•
‘C.3 Board Upload Log’ on page 135
•
‘C.4 Load Response’ on page 136
•
‘C.5 Hardware Information’ on page 137
•
‘C.6 Ok2load File’ on page 138
•
‘C.7 Boot Information’ on page 138
•
‘C.8 LAM (Legal Authority Module) Information’ on page 139
•
‘C.9 Application Information’ on page 140
•
‘C.10 Board Error Log’ on page 140
C.1
The Virtual File System
List of significant vfs files
The list of files shown below is an extract of the
/pss_proc/sys/vfs_inf.txt
file.
It lists the most significant VFS files (and their location) that can be download-
ed using FTP and viewed using any ASCII text editor. In general, these files
are of interest to specialists, but a few may be of interest to technicians.
C.2
System Setup
Description of the system
setup file
The System
setup.ini
file is used to set up the system and contains configura-
tion data that is not supported by the POS interface. The location and name of
the file is:
/pss_mem/2/appl/setup.ini
Here is an example of the contents of the file:
[
BoardProfile
]
Name=City_4_18
SiteNumber=518225099
