122 of 155
PSS5000/TEMA/803046/14
PSS 5000 – Technical Manual
9 W & M (Menu W)
menu.
3.
Press , ,
to
move
to
the
LAM CODE ERROR W.7.3
menu.
4.
Press
to move to the
LAM CODE ERROR
menu.
5.
Use the
and
buttons to toggle between
ON
and
OFF
.
When the LAM CODE ERROR value is
ON
, this simulates that the LAM
coder function has an error and the PSS 5000 must react accordingly.
6.
Return the checking device setting to
OFF
before you leave the PSS 5000.
Failure to do this will result in the PSS 5000 not operating correctly.
9.7.4
RTC Error (Menu W.7.4)
To activate RTC errors
with web service pages
The procedure used here is the same procedure as is used to check all the de-
vices, see
‘To activate checking devices with web service pages’ on page 119
.
To activate checking
RTC errors with local
service panel
This procedure describes how to activate the built-in checking device that
makes sure that the RTC (Real Time Clock) checking facility is operating cor-
rectly.
Note:
It is assumed that the Idle menu is shown in the display.
1.
Press
to move to the
LAM VERSION W.1
menu.
2.
Press , , , , ,
to
move
to
the
CHECKING DEVICES W.7
menu.
3.
Press , , ,
to
move
to
the
RTC ERROR W.7.4
menu.
4.
Press
to move to the
RTC ERROR
menu.
