![background image](http://html.mh-extra.com/html/domo/dbs-nano-pro-tx/dbs-nano-pro-tx_user-manual_2519959040.webp)
Revision: 1.0
DBS Nano PRO Transmitter User Guide
Copyright © 2022 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 6-35
6.3.4
Unit
Press the
right
button to select Unit information. Press the
left
button to exit.
Sub-menu
Notes
Temperature
Displays the internal temperature. As for Device Controller, see
Section 5.3.2
Input Voltage
Displays the supply voltage.
Software Version
Displays the FPGA software version. As for Device Controller,
see
Section 5.3.2
Ctrl S/W Version
Displays the OLED display software version. See
Section 6.4
upgrade details.
Serial Number
Displays the electronic serial number (ESN). As for Device
Controller, see
Section 5.3.2
RF Calibration
CAUTION
: This menu is for DBS Engineering only. Access will
stop RF transmission.
Remote Control
Press
Enter
to establish serial RS-232 communications to a PC.
This will allow Device Controller communications, see
Section
Software Upgrade
Press
Enter
to access the terminal program upgrade menu.
Software upgrades can be performed via a terminal program such
as Tera Term see
Section 7.2
Restore Defaults
Press
Enter
to restore the device to factory default settings. As
for Device Controller, see
Section 5.3.3