![background image](http://html.mh-extra.com/html/domo/dbs-nano-pro-tx/dbs-nano-pro-tx_user-manual_2519959035.webp)
Revision: 1.0
DBS Nano PRO Transmitter User Guide
Copyright © 2022 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 6-30
6.
OLED Display Control
6.1
Introduction
The Nano PRO TX has an OLED display and control buttons which can be used to monitor and
configure the device without the need to connect to a PC.
When the Nano PRO TX has booted up, the OLED will display the frequency and active preset.
6.2
Control Buttons
The OLED display is controlled using the buttons situated either side of the display. Either button can
be used to wake up the screen if it is in sleep mode (display off).
Left Button
The left button is the cancel/back button. Press this button to return to the previous menu or cancel
changes to a setting.
The left button will also switch between the frequency/preset display and the top-level menu.
Right Button
The right button is the navigate/select/edit button.
To navigate the display, push the button up or down through the menu.
Note
: A good tip is to use a fingernail to control navigation.
Press the button to select a chosen menu or parameter.
To edit a parameter, use the up/down and left/right buttons to change the setting as applicable.
Press to enter the changed value.