Revision: 1.0
DBS Nano PRO Transmitter User Guide
Copyright © 2022 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 0-1
0.
Preface
0.1
About this Document
This document contains relevant information required to identify, install, and control the equipment or
system.
Since the available functions can be licensed and depend on the specific implementation, not all the
functions and or applications contained in this document may be relevant or applicable to the system
you will be working with.
The actual presentation may differ from those in this document due to hardware or software changes.
0.2
Intended Audience
This document is for anyone interested in how the system can be used, but it is of most benefit to:
Operators who oversee the daily operation of the equipment
Installers who are responsible for the pre-installation, on-site installation, and configuration of the
system in the end-user environment
Maintainers who are responsible for maintaining the equipment or system
0.3
Notice about this Publication
While every attempt is made to maintain the accuracy of the information in this product manual, it is
subject to change without notice.
Performance specifications are included for guidance. All particulars are given in good faith, actual
performance may vary.
0.4
Text Conventions
This document uses these conventions to identify text that has a special meaning:
Description
Example
Text in capitals represents a key press on a keyboard.
The + sign means hold down the first key and press the second key.
ESC, F1, SHIFT
CTRL+C
<
Text
> Serves as a placeholder for variable text that is replaced as
appropriate, the text may be written in italics.
Use the filename
<
system_name
>.sys for…
Text in italics can represent a link to a place in the existing document
(often these are hyperlinks) or a reference to another document.
Refer to
Section 0.4
Text in bold emphasises a term of significance.
We call this a
protocol
and
its funct
ion is…
Successive software menu selections are shown using arrows to
indicate sub-menus. This is often shown in bold.
Select
Advanced>Audio
then edit
…